The Camellia Crown Crochet Hat: A Blooming Textured Beanie with Layered Petals

Wrap your head in the soft elegance of a hand-crocheted crown of camellia blossoms, where each petal is sculpted with rich, dimensional stitches. This cozy beanie combines a classic ribbed brim with a stunning floral crown that transitions into a delicate, openwork crown. Whether you're a seasoned crocheter or a confident beginner looking for a rewarding project, the Camellia Crown is a premium, botanical-inspired piece that will become a staple in your cold-weather wardrobe. The muted dusty rose and ivory color palette evokes a romantic, vintage feel, while the textured stitches create a truly one-of-a-kind accessory.

Materials Needed

Before you begin, gather the following supplies to ensure a smooth and enjoyable crocheting experience. This pattern uses worsted weight yarn, which is perfect for creating a warm, durable hat with excellent stitch definition.

• Yarn: Worsted weight yarn in two colors:
  • Main Color (MC) – Dusty Rose: Approximately 180 yards. Suggested: Lion Brand Wool-Ease Worsted.
  • Contrast Color (CC) – Ivory: Approximately 60 yards. Suggested: Lion Brand Wool-Ease Worsted.
• Crochet Hook: US Size H/8 (5.0 mm) crochet hook. Adjust hook size if necessary to achieve the correct gauge.
• Notions: Yarn needle for weaving in ends, stitch markers to keep track of rounds.

Gauge & Size

• Gauge: 16 hdc x 12 rows = 4 inches in half double crochet. Always check your gauge to ensure the correct fit.
• Finished Circumference: 21-22 inches (fits an average adult head).

Step-by-Step Instructions

This pattern is worked in the round from the brim up. The ribbed brim is created using post stitches, which give it excellent stretch and recovery. The body then flares out gently before the spectacular camellia petal layer is worked. Finally, the crown is decreased to close the top of the hat.

Special Stitches

• Hdc (Half Double Crochet): Yarn over, insert hook into stitch, yarn over, pull through, yarn over, pull through all 3 loops on hook.
• Fphdc (Front Post Half Double Crochet): Yarn over, insert hook from front to back to front around the post of the stitch, yarn over, pull through, yarn over, pull through all 3 loops.
• Bphdc (Back Post Half Double Crochet): Yarn over, insert hook from back to front to back around the post of the stitch, yarn over, pull through, yarn over, pull through all 3 loops.
• Petal Stitch (worked in rows): (hdc, ch 2, hdc) all in the same stitch.
• Hdc2tog (Half Double Crochet Decrease): Yarn over, insert hook into next stitch, yarn over, pull through, yarn over, insert hook into next stitch, yarn over, pull through, yarn over, pull through all 5 loops on hook.

Brim

We'll start with a magic ring to create a seamless, tight center for the top of the hat (which will become the inside of the brim).

1. Round 1: With MC, make a magic ring, ch 1, work 8 hdc into the ring. Pull the tail tight to close the ring. Join with a sl st to the first hdc. (8)
2. Round 2: Ch 1, 2 hdc in each hdc around, join with a sl st to the first hdc. (16)
3. Round 3: Ch 1, *2 hdc in next hdc, hdc in next hdc* repeat around, join. (24)
4. Round 4: Ch 1, *2 hdc in next hdc, hdc in next 2 hdc* repeat around, join. (32)
5. Round 5: Ch 1, *2 hdc in next hdc, hdc in next 3 hdc* repeat around, join. (40)
6. Round 6: Ch 1, *2 hdc in next hdc, hdc in next 4 hdc* repeat around, join. (48)
7. Round 7: Ch 1, working in the back loops only, hdc in each hdc around, join. (48) This creates a clean fold line for the brim.
8. Rounds 8-12: Ch 1, working in both loops, *Fphdc around the post of the next stitch, Bphdc around the post of the next stitch* repeat around, join. (48) This creates a stretchy, textured ribbed brim.

Body

Now we'll transition to the smooth body of the hat, increasing gradually to flare out from the brim.

13. Round 13: Ch 1, hdc in each hdc around, join. (48)
14. Round 14: Ch 1, *hdc in next 5 hdc, 2 hdc in next hdc* repeat around, join. (56)
15. Round 15: Ch 1, hdc in each hdc around, join. (56)
16. Round 16: Ch 1, *hdc in next 6 hdc, 2 hdc in next hdc* repeat around, join. (64)
17. Round 17: Ch 1, hdc in each hdc around, join. (64)
18. Round 18: Ch 1, *hdc in next 7 hdc, 2 hdc in next hdc* repeat around, join. (72)
19. Rounds 19-24: Ch 1, hdc in each hdc around, join. (72) Work even for 6 rounds to create the height of the hat.

Camellia Petal Layer

This is where the magic happens! We'll create a three-dimensional flower with layered petals using chain spaces and post stitches. The petals will curl outward for a realistic, organic look.

25. Round 25: Ch 1, *skip next 2 hdc, Petal Stitch (hdc, ch 2, hdc) in next hdc, skip next 2 hdc, sl st in next hdc* repeat around, join with a sl st to the first sl st. (12 petals)
26. Round 26: Ch 1, *sl st in the ch-2 space of the next petal, ch 3, sl st in the same ch-2 space* repeat around, join. (12 loops)
27. Round 27: Ch 1, *in the next ch-3 loop work (hdc, dc, ch 2, dc, hdc), sl st between petals* repeat around, join. (12 larger petals)
28. Round 28: Ch 1, *sl st in the ch-2 space of the next large petal, ch 4, sl st in the same ch-2 space* repeat around, join. (12 loops)
29. Round 29: Ch 1, *in the next ch-4 loop work (hdc, 2 dc, ch 2, 2 dc, hdc), sl st between petals* repeat around, join. (12 final petals)

Crown (Decrease for Top)

Now we'll work behind the petals to close the top of the hat. This creates a beautiful, gathered crown that sits behind the flower.

30. Round 30: Ch 1, working behind the petals, hdc in each hdc from Round 24 (the last plain round), join. (72)
31. Round 31: Ch 1, *hdc in next 7 hdc, hdc2tog* repeat around, join. (64)
32. Round 32: Ch 1, *hdc in next 6 hdc, hdc2tog* repeat around, join. (56)
33. Round 33: Ch 1, *hdc in next 5 hdc, hdc2tog* repeat around, join. (48)
34. Round 34: Ch 1, *hdc in next 4 hdc, hdc2tog* repeat around, join. (40)
35. Round 35: Ch 1, *hdc in next 3 hdc, hdc2tog* repeat around, join. (32)
36. Round 36: Ch 1, *hdc in next 2 hdc, hdc2tog* repeat around, join. (24)
37. Round 37: Ch 1, *hdc in next hdc, hdc2tog* repeat around, join. (16)
38. Round 38: Ch 1, *hdc2tog* repeat around, join. (8)

Fasten off, leaving a long tail (about 12 inches). Thread the tail through a yarn needle, then weave it through the remaining 8 stitches. Pull tight to close the hole, and secure with a knot.

Finishing

1. Weave in all loose ends with your yarn needle, being careful not to pull too tightly and distort the fabric.
2. Optional Camellia Center: To add a beautiful finishing touch, create a small center for the flower using CC. Make a magic ring, ch 2, work 5 dc into the ring, join with a sl st to the first dc. Fasten off, leaving a tail. Sew this small circle to the very center of the petals, where they all meet.
3. Blocking: Gently block the hat to shape the petals and even out the stitches. You can do this by lightly steaming the hat (without touching it directly) or by wetting it and laying it flat to dry in the desired shape. This will help the petals curl beautifully outward.

Your Camellia Crown Crochet Hat is now complete! This stunning, botanical-inspired beanie is sure to turn heads and keep you cozy all season long. The layered petals and textured stitches make it a true work of art. Enjoy wearing your handmade creation, and don't forget to share your finished project with the crochet community!