Mossy Gnome Home Free Pattern – A Knitted Forest Dwelling Amigurumi

Bring a touch of woodland whimsy to your shelf with this knitted gnome home, complete with a textured moss roof and a cozy wooden door. This charming amigurumi is perfect for nature lovers and makes a delightful handmade gift. Whether you're a seasoned knitter or a curious beginner, this project is a wonderful way to practice basic stitches while creating something truly magical. The finished piece is soft, squishy, and about 4 inches tall, with a cozy, handcrafted woodland aesthetic that will brighten any room.

In this comprehensive guide, I'll walk you through every step—from gathering your materials to the final assembly. By the end, you'll have your very own mossy gnome home to display, gift, or add to a whimsical collection. Let's dive in!

Materials Needed

Before you begin, gather the following supplies. Having everything ready will make the process smooth and enjoyable.

Yarn

• Worsted weight yarn in earthy tones:
  • Brown (for the body)
  • Cream (optional, for accents or base)
  • Moss green (for the roof)
  • Dark brown (for the door)

Needles & Tools

• US 4 (3.5 mm) knitting needles (or size needed to obtain gauge)
• Tapestry needle (for sewing pieces together and weaving in ends)
• Scissors
• Polyester fiberfill (for stuffing)
• Stitch markers (optional, but helpful for tracking rows)

Gauge

20 stitches and 28 rows = 4 inches in stockinette stitch. While gauge isn't critical for this project, matching it will ensure your gnome home is the intended size. If you knit loosely or tightly, adjust your needle size accordingly.

Step-by-Step Instructions

This knitted amigurumi is worked in pieces and sewn together. The main body is a simple tube, the roof is a textured circle, and the door is a small rectangle. All pieces are knitted flat and then assembled. Follow along carefully, and you'll have a charming gnome home in no time.

Body (Knit Flat)

1. Cast on 20 stitches with brown yarn. Leave a tail about 6 inches long for sewing later.
2. Work in stockinette stitch (knit one row, purl one row) for 30 rows. To keep track, count your rows as you go—each knit row and purl row counts as one row total.
3. Bind off all stitches loosely. Cut the yarn, leaving a long tail (about 12 inches) for seaming. This rectangle will form the main cylindrical body of the home.

Tip: If you prefer a seamless look, you could knit this in the round, but the pattern calls for flat knitting and seaming, which is beginner-friendly and creates a neat, sturdy structure.

Roof (Knit Flat)

The roof is a triangular piece that will be gathered to form a cone shape. The increases create a subtle ribbed texture, mimicking mossy layers.

1. With moss green yarn, cast on 6 stitches. Leave a tail for sewing.
2. Row 1: Knit all stitches. (6 stitches)
3. Row 2: Knit 1, yarn over, knit to the last stitch, yarn over, knit 1. (8 stitches)
4. Row 3: Knit all stitches. (8 stitches)
5. Row 4: Knit 1, yarn over, knit to the last stitch, yarn over, knit 1. (10 stitches)
6. Repeat rows 3 and 4 until you have 30 stitches on the needle. This will take several repeats—each pair of rows adds 2 stitches.
7. Bind off all stitches loosely. Cut the yarn, leaving a long tail (about 15 inches) for gathering and sewing.

Note: The yarn over (YO) creates a small hole, but when the piece is gathered and stuffed, these holes will be hidden and add to the textured, organic look of the moss roof.

Door (Knit Flat)

1. With dark brown yarn, cast on 6 stitches. Leave a tail for sewing.
2. Work in stockinette stitch for 8 rows. (Knit one row, purl one row, repeating four times.)
3. Bind off all stitches. Cut the yarn, leaving a tail for sewing. This small rectangle will be the cozy wooden door.

Assembly

Now comes the fun part—bringing all the pieces together! Take your time with the seaming to ensure a polished finish.

Step 1: Sew the Body

1. Fold the body piece in half lengthwise, with the right sides together (the side you want facing outward should be inside).
2. Sew the side seam using a mattress stitch or whip stitch, creating a tube. Use the long tail from your bind-off or cast-on.
3. Turn the tube right side out. Now you have a cylinder with one open end at the top and one at the bottom.

Step 2: Close the Top

1. Thread a yarn needle with a length of yarn (about 12 inches).
2. Run the needle through the stitches around the top opening, weaving in and out.
3. Pull the yarn tight to gather the top closed. Secure with a few stitches and a knot.
4. Weave in the end or leave it for now—it will be covered by the roof.

Step 3: Stuff the Body

1. Stuff the body firmly with polyester fiberfill. Use small amounts at a time, pushing them down with your fingers or a blunt tool. The body should be plump but not overstuffed, so the shape remains cylindrical.

Step 4: Close the Bottom

1. Gather the bottom edge the same way you did the top, but do not pull it completely closed. Leave a small opening—about 1 inch wide—so you can insert the door later.
2. Secure the gathering with a few stitches, but keep the opening accessible.

Step 5: Attach the Door

1. Position the door on the front of the body, about 1 inch above the bottom edge. Center it horizontally.
2. Sew the door in place using a whip stitch around all four edges. Use the dark brown tail and a tapestry needle. Make sure the stitches are neat and secure.
3. Weave in the yarn end on the inside of the body.

Step 6: Shape the Roof

1. Thread a yarn needle with the long tail from the roof's bind-off edge.
2. Run a gathering thread along the long straight edge of the triangular piece. This is the edge opposite the point.
3. Pull the thread tight to form a cone shape. The point of the triangle becomes the top of the cone, and the gathered edge becomes the base.
4. Secure the gathering with a few stitches and a knot. Don't cut the yarn yet—you'll use it to sew the roof to the body.

Step 7: Stuff the Roof

1. Stuff the roof lightly with fiberfill. You want it to hold its cone shape but remain soft and squishy. Don't overstuff, or it may lose its gentle taper.

Step 8: Attach the Roof

1. Place the roof over the gathered top of the body. The base of the cone should sit flush against the body, covering the gathered stitches.
2. Sew the roof to the body using a whip stitch around the circumference of the roof's base. Work slowly, making sure the roof is evenly attached and the stitches are hidden in the texture.
3. Secure the yarn and weave in the end.

Step 9: Final Touches

1. Weave in all loose ends using the tapestry needle. Trim any excess yarn.
2. Shape the gnome home by gently molding the body and roof with your hands. Adjust the stuffing if needed.

Tips for a Perfect Finish

• Use stitch markers to keep track of your rows, especially on the roof where increases are frequent.
• Keep your tension consistent. If your stockinette is uneven, the body may look wavy. Practice a few rows if needed.
• When gathering, pull slowly to avoid breaking the yarn. If the yarn is slippery, double it for extra strength.
• Customize your gnome home! Add a tiny chimney, a wreath on the door, or even a small window. The possibilities are endless.

Why You'll Love This Pattern

This Mossy Gnome Home is more than just a craft project—it's a tiny piece of woodland magic. The combination of earthy colors and textured stitches creates a rustic, handcrafted charm that fits perfectly on a shelf, mantel, or desk. It's also a fantastic gift for nature lovers, fairy-tale enthusiasts, or anyone who appreciates handmade coziness.

Because the pieces are simple rectangles and a triangle, this pattern is ideal for beginners looking to practice stockinette stitch, increases, and basic seaming. And once you've mastered it, you can experiment with different colors and sizes to create a whole village of gnome homes!

I hope you enjoy knitting your very own forest dwelling. Share your creations with me—I'd love to see your cozy little homes! Happy knitting!