Frosted Berry Gnome Ornament Free Pattern – Crochet a Cozy Winter Keepsake

Bring a touch of woodland whimsy to your holiday decor with this adorable crochet gnome, complete with a fluffy beard and a frosted berry hat. Perfect for gifting or hanging on your tree, this pattern is quick to work up and uses simple stitches. Whether you're a seasoned crocheter or just starting your amigurumi journey, this beginner-friendly project will become a cherished part of your winter traditions. The finished gnome measures about 3 inches tall, making it the perfect size for ornaments, gift toppers, or even a festive garland.

Materials Needed

Before you begin, gather the following supplies. This project uses basic materials that are easy to find at any craft store.

• Yarn: Worsted weight yarn in the following colors:
  • Red (for the hat)
  • Cream (for the head and beard)
  • Forest green (for the hanging loop)
  • Small amount of white (for the hat pom)
• Hook: 3.5mm (E) crochet hook
• Other Supplies:
  • Yarn needle for sewing and weaving in ends
  • Polyester fiberfill stuffing
  • Scissors
  • Stitch marker (optional, but helpful for keeping track of rounds)
  • Small amount of black yarn or embroidery floss (for the face, optional)

Gauge: Gauge is not critical for this project. However, aim for a tight tension to prevent the stuffing from showing through your stitches. If your stitches are loose, consider using a smaller hook (3.25mm) to achieve a denser fabric.

Step-by-Step Instructions

Follow these detailed instructions carefully. The pattern is written in standard US crochet terms. Work in continuous rounds (spiral) unless otherwise noted. Use a stitch marker to mark the beginning of each round.

Head & Body (worked in one piece)

This section creates the gnome's face and body in a single continuous piece. Take your time and keep your tension consistent.

1. Round 1: With cream yarn, make a magic ring. Work 6 single crochet (sc) into the ring. Pull the ring tight to close. (6 stitches)
2. Round 2: Increase (inc) in each stitch around. This means work 2 sc into each of the 6 stitches. (12 stitches)
3. Round 3: *Sc in the next stitch, inc in the next stitch* — repeat from * to * around. (18 stitches)
4. Round 4: *Sc in the next 2 stitches, inc in the next stitch* — repeat from * to * around. (24 stitches)
5. Round 5: *Sc in the next 3 stitches, inc in the next stitch* — repeat from * to * around. (30 stitches)
6. Rounds 6-10: Sc in each stitch around for 5 rounds. Do not increase or decrease. (30 stitches each round)
7. Round 11: *Sc in the next 3 stitches, decrease (dec) in the next stitch* — repeat from * to * around. To decrease, insert your hook into the next stitch, yarn over and pull up a loop, insert your hook into the following stitch, yarn over and pull up a loop, yarn over and pull through all 3 loops on your hook. (24 stitches)
8. Round 12: *Sc in the next 2 stitches, dec in the next stitch* — repeat from * to * around. (18 stitches)
9. Stuff the head firmly: Use your polyester fiberfill to stuff the head. Make sure it's nice and plump, but not so tight that it distorts the shape. The body will be smaller, so focus the stuffing in the head area for now.
10. Round 13: *Sc in the next stitch, dec in the next stitch* — repeat from * to * around. (12 stitches)
11. Round 14: Dec around. This means decrease in each stitch around. (6 stitches)
12. Fasten off: Cut the yarn, leaving a long tail (about 12 inches). Thread the tail onto your yarn needle. Weave the needle through the front loops of the remaining 6 stitches. Pull tight to close the hole. Secure the yarn and weave in the end.

Beard

The beard is created using a series of chain stitches that are then trimmed to create a fluffy, textured effect. This is a fun and forgiving step—don't worry about perfection!

1. Attach yarn: With cream yarn, insert your hook into the front of the head, around rounds 8-12 (the middle of the face). Pull up a loop and chain 1 to secure.
2. Create chains: Work a series of chain stitches (ch 8-10 each) across the front of the face. To do this, chain 8-10, then slip stitch into the next stitch on the head to anchor the chain. Repeat this process, working from one side of the face to the other, skipping a stitch between each chain. This will create a row of loops hanging down.
3. Fasten off: When you've covered the desired area (roughly a 2-inch wide section across the front of the face), fasten off and weave in the end.
4. Trim the beard: Using sharp scissors, carefully trim the chains to create a fluffy, uneven beard effect. Trim some chains shorter and leave others longer for a natural, bushy look. You can also gently brush the yarn with a pet brush or your fingers to fluff it up.

Hat

The hat is worked from the top down, starting with a magic ring and increasing gradually to create the cone shape. The brim is folded up at the end.

1. Round 1: With red yarn, make a magic ring. Work 6 sc into the ring. Pull tight. (6 stitches)
2. Round 2: Inc in each stitch around. (12 stitches)
3. Round 3: *Sc in the next stitch, inc in the next stitch* — repeat around. (18 stitches)
4. Rounds 4-6: Sc in each stitch around for 3 rounds. (18 stitches each round)
5. Round 7: *Sc in the next 2 stitches, inc in the next stitch* — repeat around. (24 stitches)
6. Rounds 8-10: Sc in each stitch around for 3 rounds. (24 stitches each round)
7. Round 11: *Sc in the next 3 stitches, inc in the next stitch* — repeat around. (30 stitches)
8. Rounds 12-14: Sc in each stitch around for 3 rounds. (30 stitches each round)
9. Round 15: *Sc in the next 4 stitches, inc in the next stitch* — repeat around. (36 stitches)
10. Rounds 16-18: Sc in each stitch around for 3 rounds. (36 stitches each round)
11. Round 19: *Sc in the next 5 stitches, inc in the next stitch* — repeat around. (42 stitches)
12. Rounds 20-22: Sc in each stitch around for 3 rounds. (42 stitches each round)
13. Round 23: *Sc in the next 6 stitches, inc in the next stitch* — repeat around. (48 stitches)
14. Rounds 24-26: Sc in each stitch around for 3 rounds. (48 stitches each round)
15. Round 27: *Sc in the next 7 stitches, inc in the next stitch* — repeat around. (54 stitches)
16. Rounds 28-30: Sc in each stitch around for 3 rounds. (54 stitches each round)
17. Round 31: *Sc in the next 8 stitches, inc in the next stitch* — repeat around. (60 stitches)
18. Rounds 32-34: Sc in each stitch around for 3 rounds. (60 stitches each round)
19. Fasten off: Cut the yarn, leaving a long tail (about 18 inches) for sewing.
20. Fold the brim: Fold the bottom 4 rounds of the hat up (toward the top of the hat). This creates the folded brim look. Pin it in place if needed.
21. Sew the brim: Using the long tail and your yarn needle, sew the folded brim in place by stitching through both layers of the hat. Make small, invisible stitches around the circumference.
22. Add the pom: Create a small pom-pom using the white yarn. You can use a pom-pom maker, a fork, or simply wrap the yarn around two fingers about 20 times, tie it in the middle, and trim the ends. Attach the pom securely to the tip of the hat using the yarn tail.

Assembly

Now it's time to bring your gnome to life! Take your time with this step to ensure a neat, professional finish.

1. Position the hat: Place the hat on top of the head, covering the top of the beard. The folded brim should sit just above the eyes (if you're adding them) and the beard should peek out from underneath.
2. Sew the hat: Using the long tail from the hat, sew the hat securely to the head. Work around the base of the hat, making small stitches that go through both the hat and the head. Make sure the hat is centered and straight.
3. Create the hanging loop: Cut a piece of forest green yarn about 8 inches long. Fold it in half to create a loop. Thread the ends through the top of the hat (at the tip, near the pom) using your yarn needle. Pull the ends through and tie a secure knot on the inside of the hat. Weave in the ends.
4. Embroider the face (optional): Using the black yarn or embroidery floss, embroider a tiny smile on the face. You can also add small eyes if you prefer, though the pattern traditionally leaves the face bare except for the beard. To make a smile, thread your needle with black yarn, insert it at one corner of the mouth area, and make a small curved stitch to the other corner. Repeat to make the smile more defined.
5. Final touches: Fluff the beard and adjust the hat as needed. Weave in any remaining loose ends.

Your Frosted Berry Gnome Ornament is complete! Hang it on your tree, attach it to a gift, or display it on a shelf. This pattern is so quick and fun that you'll want to make a whole family of gnomes in different colors. Happy crocheting!