The Frosted Berry Bramble Beanie and Wrist Warmers: A Free Crochet Pattern

Wrap yourself in the cozy charm of a wild berry patch with this textured crochet set. The Frosted Berry Bramble Beanie and Wrist Warmers feature a lush, all-over bobble stitch that mimics clusters of frost-kissed fruit, creating a dense, plush, and utterly irresistible texture. The matching wrist warmers keep your hands toasty while leaving your fingers free for all your winter adventures—texting, knitting, or holding a warm mug of cider. This pattern is perfect for intermediate beginners ready to tackle a new stitch, and the result is a rustic, handcrafted treasure you'll reach for all season long.

This set is worked in worsted weight yarn, making it a quick and satisfying project. The beanie is crocheted in continuous spirals for a seamless crown, while the wrist warmers are worked in joined rounds with a clever thumb-hole opening. The bobble stitch (BOB) is the star of the show, creating raised, berry-like clusters that are surprisingly simple to master. Let's gather our materials and dive into this delightful winter project!

Materials Needed

Before you begin, ensure you have all the necessary supplies. This pattern calls for specific yarn weights and a hook size to achieve the correct gauge and cozy, dense fabric.

• Yarn: Worsted weight yarn in three colors:
  • MC (Main Color): Deep Berry – approximately 250g (about 500 yards)
  • CC1 (Contrast Color 1): Cream – approximately 100g (about 200 yards)
  • CC2 (Contrast Color 2): Sage Green – approximately 50g (about 100 yards) for embroidery
• Crochet Hook: 5.5mm (I-9) crochet hook
• Notions: Yarn needle for weaving in ends and embroidery, stitch markers (optional but helpful)
• Gauge: 14 dc x 8 rows = 4 inches (10 cm) in standard dc; 1 bobble repeat (3 dc cluster) = 1 inch wide. Always check your gauge to ensure the correct fit.

Step-by-Step Instructions

This pattern is worked in continuous spirals for the beanie and flat rows for the wrist warmers. All bobbles are made as follows:

Bobble (BOB): Yarn over, insert hook into stitch, yarn over, pull up loop, yarn over, pull through 2 loops (2 loops on hook). Repeat 3 more times in same stitch (5 loops on hook). Yarn over, pull through all 5 loops. This creates a raised, berry-like cluster.

Beanie

Start with MC. Make a magic ring.

• Round 1: Work 6 sc into ring. Pull tight. (6 sts)
• Round 2: Work 2 sc in each st around. (12 sts)
• Round 3: *Sc in next st, 2 sc in next st* repeat around. (18 sts)
• Round 4: *Sc in next 2 sts, 2 sc in next st* repeat around. (24 sts)
• Round 5: *Sc in next 3 sts, 2 sc in next st* repeat around. (30 sts)
• Round 6: *Sc in next 4 sts, 2 sc in next st* repeat around. (36 sts)
• Round 7: *Sc in next 5 sts, 2 sc in next st* repeat around. (42 sts)
• Round 8: *Sc in next 6 sts, 2 sc in next st* repeat around. (48 sts)
• Round 9: *Sc in next 7 sts, 2 sc in next st* repeat around. (54 sts)
• Round 10: *Sc in next 8 sts, 2 sc in next st* repeat around. (60 sts)
• Round 11: *Sc in next 9 sts, 2 sc in next st* repeat around. (66 sts)
• Round 12: *Sc in next 10 sts, 2 sc in next st* repeat around. (72 sts)

Now begin the bobble pattern. Work in continuous rounds, no joining.

• Round 13: *Sc in next 2 sts, BOB in next st, sc in next 2 sts* repeat around. (12 bobbles, 72 sts total)
• Round 14: Sc in each st around. (72 sts)
• Round 15: *Sc in next 5 sts, BOB in next st* repeat around. (12 bobbles, 72 sts)
• Round 16: Sc in each st around. (72 sts)
• Round 17: *Sc in next 2 sts, BOB in next st, sc in next 2 sts* repeat around. (12 bobbles)
• Round 18: Sc in each st around. (72 sts)
• Round 19: *Sc in next 5 sts, BOB in next st* repeat around. (12 bobbles)
• Round 20: Sc in each st around. (72 sts)

Repeat Rounds 17-20 two more times (total of 6 bobble rows). Then work Rounds 17-18 once more. You should have 8 bobble rows total.

Next, switch to CC1 (Cream) for the brim.

• Round 29: With CC1, sc in each st around. (72 sts)
• Round 30: *Sc in next 2 sts, 2 sc in next st* repeat around. (96 sts)
• Round 31: Sc in each st around. (96 sts)
• Round 32: *Sc in next 3 sts, 2 sc in next st* repeat around. (120 sts)
• Round 33: Sc in each st around. (120 sts)
• Round 34: *Sc in next 4 sts, 2 sc in next st* repeat around. (144 sts)
• Round 35: Sc in each st around. (144 sts)
• Round 36: *Sc in next 5 sts, 2 sc in next st* repeat around. (168 sts)
• Round 37: Sc in each st around. (168 sts)

Fasten off and weave in ends. Fold brim up over the bobble section.

Wrist Warmers (Make 2)

With MC, ch 30. Join with sl st to form a ring, being careful not to twist.

• Round 1: Ch 2 (counts as dc), dc in each ch around, join with sl st to top of ch-2. (30 dc)
• Round 2: Ch 2, dc in each st around, join. (30 dc)
• Round 3: Ch 2, *dc in next 3 sts, BOB in next st* repeat around, join. (7 bobbles, 30 sts)
• Round 4: Ch 2, dc in each st around, join. (30 dc)
• Round 5: Ch 2, *dc in next 6 sts, BOB in next st* repeat around (4 bobbles, 30 sts), join.
• Round 6: Ch 2, dc in each st around, join. (30 dc)
• Round 7: Ch 2, *dc in next 3 sts, BOB in next st* repeat around, join. (7 bobbles)
• Round 8: Ch 2, dc in each st around, join. (30 dc)
• Round 9: Ch 2, *dc in next 6 sts, BOB in next st* repeat around, join. (4 bobbles)
• Round 10: Ch 2, dc in each st around, join. (30 dc)

Now create the thumb hole. Work in rows.

• Row 11: Ch 2, dc in next 14 sts, turn. (15 dc)
• Row 12: Ch 2, dc in each st across, turn. (15 dc)
• Row 13: Ch 2, dc in each st across, turn. (15 dc)
• Row 14: Ch 2, dc in each st across, turn. (15 dc)
• Row 15: Ch 2, dc in each st across, turn. (15 dc)

Now rejoin to work in the round again. Sl st to the first dc of Row 11 to close the gap, then continue.

• Round 16: Ch 2, dc in each st around the entire opening (including the edge of the rows), join. (30 dc)
• Round 17: Ch 2, dc in each st around, join. (30 dc)
• Round 18: Switch to CC1. Ch 2, dc in each st around, join. (30 dc)
• Round 19: With CC1, ch 1, sc in each st around, join. (30 sc)

Fasten off. Weave in ends. Repeat for second wrist warmer.

Finishing Touches

Using CC2 (Sage Green), embroider small leaf shapes at the base of each bobble on the beanie and wrist warmers. To make a leaf: Thread yarn needle with CC2, insert from inside to outside at the base of a bobble, then make a small straight stitch about 1/2 inch long, then a second stitch at a slight angle to form a V shape. Repeat for each bobble or as desired. Weave in all ends securely.

Your Frosted Berry Bramble set is complete! The dense bobble texture and the creamy, folded brim create a stunning, high-end look that belies its simple construction. The embroidered leaves add that final, whimsical touch that makes this set truly special. Whether you're gifting it or keeping it for yourself, this cozy ensemble is sure to become a winter favorite. Happy crocheting!